Page 154 - Course_Catalog_2020-2021
P. 154

AUTO 93E Diagnostic Techniques 1 1/2 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. One hour lecture, one and one-half hours laboratory (30 hours total per quarter). Diagnostic techniques for problem-solving in the automotive and light-duty truck powertrain.
AUTO 93F Automotive Transmission Service 6 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Operation of rear axles, transfer cases, clutches, automatic and standard transmissions, and transaxles. Diagnostic, inspection and repair procedures for these powertrain components.
AUTO 94A Principles of Four Stroke Cycle Gas 6 Units and Diesel Engines
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Shop operations specific to engine repair and rebuilding including safety and hazardous waste management. Emphasis on theory, diagnosis, disassembly, cleaning, inspection and failure analysis.
AUTO 94B Automotive Machining and 6 Units Engine Service
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter). Reconditioning cylinder heads and related valve train components including crack detection, repair, testing and assembly. Resurfacing cylinder heads.
The fundamentals of automotive electronic devices as they apply to the automotive charging and ignition systems. Emphasis on diagnosis of these systems A using test instruments including the oscilloscope. Introduction to automotive accessory systems including wiring and repair techniques. Skill development
in the understanding of the electrical wiring diagram networks as provided by manufacturers.
AUTO 94C Automotive Machining and Engine Service
6 Units
Prerequisite: AUTO 94A.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter). Reconditioning engine short block assemblies and components including balancing, assembly and testing.
AUTO 94D Automotive Machining and Engine Service
6 Units
Prerequisite: AUTO 94A.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Precision and performance engine preparation with emphasis on improvements in volumetric efficiency. Includes selection and matching of components for maximum efficiency within mandated emissions requirements.
AUTO 94E Automotive Machining and Engine Service
6 Units
Prerequisite: AUTO 94C.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Complete automotive machine shop practice including engine repair, assembly, testing and installation. Researching service and installation procedures and parts and labor estimating.
AUTO 94F Automotive Machining and Engine Service
6 Units
Prerequisite: AUTO 94C.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, six hours laboratory (120 hours total per quarter).
Practice and skill development with emphasis on precision and productivity in rebuilding, servicing and installing engines. Research and prepare equipment operation and maintenance instructions.
AUTO 99A Automotive Electricity, Battery and Cranking Systems
7 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter). Automotive electricity including the electron theory, fundamentals of circuit construction and interpretation, principles of magnetism as applied to electric motors, relays and coils. Diagnosis, troubleshooting and servicing of automotive battery and cranking systems including system repair procedures. Developing skills in the use of test equipment including the DVOM and electrical load testing tools for the analysis and diagnosis of these types of electrical systems.
AUTO 99B Automotive Charging, Ignition and Accessory Systems
7 Units
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter).
2O20-2O21 DE ANZA COLLEGE CATALOG
153
All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.
AUTO 99C
Prerequisite: AUTO 99A.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter). Electronically controlled automotive systems. Fundamentals of automotive microprocessors and automotive onboard computers. Testing techniques for system input and output devices. Diagnosis, troubleshooting, and repairing the automotive fuel supply system including carburetion and feedback carburetion. Diagnosis, troubleshooting, and repair techniques for no-start conditions. Procedure development for analyzing and repairing common problems of fuel, ignition, electrical and basic engine mechanical systems which affect engine performance of the automobile.
Introduction to Engine Performance
7 Units
Systems
AUTO 99D
Prerequisite: AUTO 99A.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter). Electronically controlled engine performance systems. Diagnosing, troubleshooting and repairing the automotive fuel-injection systems of domestic automobiles. Testing techniques for system input and output devices using automotive scanners and oscilloscopes.
AUTO 99E Basic Engine Performance Diagnostic 7 Units Procedures
Prerequisite: AUTO 99C.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter). Automotive technician training program to include each system which aids in increasing fuel economy and in the reduction of emissions and pollutants from the automobile. Diagnosing and troubleshooting the systems controlling automotive performance and drive-ability.
AUTO 99F Intermediate Engine Performance 7 Units Diagnostic Procedures
Prerequisite: AUTO 99C.
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture, nine hours laboratory (156 hours total per quarter). Performance tuning of automotive gasoline engines. Emphasis on reference material dealing with repair procedures, specifications, and efficient tune-up procedures. Intermediate level for usage of computer scanners and oscilloscopes. Diagnosing, troubleshooting and repairing the systems designed for the control of engine temperature.
AUTO 350A Introduction to Automotive Principles 0 Units
(This is a noncredit CTE course, which can lead to and only be applied to a non- transcriptable certificate.)
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture (48 hours total per quarter).
(No limit on student re-enrollment for 0 unit courses.)
Pass-No Pass (P-NP) course.
A selective study of the automobile’s engine systems. Knowledge and skills that are necessary for basic repair, maintenance, and troubleshooting of today’s engine systems. This course may be used to fulfill the prerequisite to the Automotive Technology Program.
AUTO 350B Applied Automotive Principles 0 Units
(This is a noncredit CTE course, which can lead to and only be applied to a non- transcriptable certificate.)
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 350A (may be taken concurrently).
One and one-half hours lecture, two and one-half hours laboratory (48 hours total per quarter).
(No limit on student re-enrollment for 0 unit courses.)
Pass-No Pass (P-NP) course.
Basic experiences in automotive repair and maintenance as related to the engine and its supporting systems.
AUTO 351A Introduction to Automotive 0 Units Principles - Chassis Systems
(This is a noncredit CTE course, which can lead to and only be applied to a non- transcriptable certificate.)
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture (48 hours total per quarter).
(No limit on student re-enrollment for 0 unit courses.)
Pass-No Pass (P-NP) course.
A selective study of the automobile’s chassis and drive line systems. Knowledge and skills necessary for basic repair, maintenance, and troubleshooting of today’s chassis and drive line systems. Can be used to fulfill the prerequisite to the Automotive Technology Program.
Intermediate Engine Performance
7 Units
Systems






















   152   153   154   155   156