Page 174 - Course_Catalog_2020-2021
P. 174

DMT 66E Creo Parametric (Intermediate)
4 Units
DMT 68D Creo Parametric Surface Modeling 4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Parametric and free-form surfacing methodologies in Creo are used to create organic 3D shapes that follow a processed-based (or task-based) approach to modeling. This course includes the application of multifaceted surface features in designing product models and molds for industry.
DMT 68E Creo Parametric Surface Modeling 4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Parametric and free-form surfacing methodologies in Creo are used to create organic 3D shapes that follow a processed-based (or task-based) approach to modeling. This course includes the application of multifaceted surface features in designing product models and molds for industry.
DMT 70A Introduction to Computer Aided 4 Units Design Using AutoCAD
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoCAD software. Emphasis on 2D drawings and dimensioning.
DMT 70B Introduction to Computer Aided 4 Units Design Using AutoCAD
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoCAD software. Emphasis on 2D drawings and dimensioning.
DMT 70C Introduction to Computer Aided 4 Units Design Using AutoCAD
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoCAD software. Emphasis on 2D drawings and dimensioning.
DMT 70D Introduction to Computer Aided 4 Units Design Using AutoCAD
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoCAD software. Emphasis on 2D drawings and dimensioning.
DMT 70E Introduction to Computer Aided 4 Units Design Using AutoCAD
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoCAD software. Emphasis on 2D drawings and dimensioning.
DMT 73A Introduction to Computer Aided 4 Units Design Using Autodesk Inventor
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoDesk Inventor software. Application of AutoDesk Inventor in creating manufacturing models (parts, assemblies and drawings).
DMT 73B Introduction to Computer Aided 4 Units Design Using Autodesk Inventor
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoDesk Inventor software. Application of AutoDesk Inventor in creating manufacturing models (parts, assemblies and drawings).
DMT 73C Introduction to Computer Aided 4 Units Design Using Autodesk Inventor
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263; MATH 210
or equivalent.
Two hours lecture, six hours laboratory (96 hours total per quarter). Introduction-level computer-aided design and drafting using AutoDesk Inventor software. Application of AutoDesk Inventor in creating manufacturing models (parts, assemblies and drawings).
D
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
This course covers the intermediate-level application of Creo Parametric that expands the basic knowledge and understanding of solid models and drawings. Special emphasis is given to the creation of parts, assemblies, and drawings which are more complex and technically more difficult than those projects found in the course prerequisite.
DMT 67A Creo Parametric: Top-Down Design and Advanced System Tools
4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using Creo Parametric. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using Top-Down Assembly techniques. Exploration of intricate models (parts, assemblies, sheetmetal and complex feature sets).
DMT 67B Creo Parametric: Top-Down Design and Advanced System Tools
4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using Creo Parametric. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using Top-Down Assembly techniques. Exploration of intricate models (parts, assemblies, sheetmetal and complex feature sets).
DMT 67C Creo Parametric: Top-Down Design 4 Units and Advanced System Tools
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using Creo Parametric. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using Top-Down Assembly techniques. Exploration of intricate models (parts, assemblies, sheetmetal and complex feature sets).
DMT 67D Creo Parametric: Top-Down Design and Advanced System Tools
4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using Creo Parametric. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using Top-Down Assembly techniques. Exploration of intricate models (parts, assemblies, sheetmetal and complex feature sets).
DMT 67E Creo Parametric: Top-Down Design and Advanced System Tools
4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Advanced 3D Solid Modeling techniques using Creo Parametric. Emphasis is on Advanced Assembly Mates, Large Assembly Management Tools, and Top-Down Design. In addition, time is given to safe and proper development of new Solid Models and Drawing Documents from legacy solid models, using Top-Down Assembly techniques. Exploration of intricate models (parts, assemblies, sheetmetal and complex feature sets).
DMT 68A Creo Parametric Surface Modeling 4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Parametric and free-form surfacing methodologies in Creo are used to create organic 3D shapes that follow a processed-based (or task-based) approach to modeling. This course includes the application of multifaceted surface features in designing product models and molds for industry.
DMT 68B Creo Parametric Surface Modeling
4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Parametric and free-form surfacing methodologies in Creo are used to create organic 3D shapes that follow a processed-based (or task-based) approach to modeling. This course includes the application of multifaceted surface features in designing product models and molds for industry.
DMT 68C Creo Parametric Surface Modeling
4 Units
Prerequisite: Any DMT 65A-E course.
Two hours lecture, six hours laboratory (96 hours total per quarter).
Parametric and free-form surfacing methodologies in Creo are used to create organic 3D shapes that follow a processed-based (or task-based) approach to modeling. This course includes the application of multifaceted surface features in designing product models and molds for industry.
2O20-2O21 DE ANZA COLLEGE CATALOG
173
All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.












   172   173   174   175   176